How Do I run a Manual cycle?

[Jim]

Manual cycles (ie. a cycle that is manually initiated as opposed to a scheduled cycle) can be started by clicking on the "Actions" tab from the schedule page.

In LawnCheck, a manual cycle is called a "Quick Cycle."  You can run a quick cycle at any time.  However, if the controller has already accepted a scheduled irrigation command you will receive a busy message.  If you still wanted to run the quick cycle you would first issue a "reset" action.

You can define and save up to 5 quick cycles.  You can also run quick cycles from the Smart Phone web site.  The Smart Phone site offers pages designed for a smaller phone screen.