LawnCheck Smart Irrigation
LawnCheck FAQ and Help => LawnCheck Operation and Usage FAQ => Topic started by: Jim on July 24, 2010, 03:13:19 pm
-
Generally when you receive an email from LawnCheck that a scheduled cycle was not delivered you can be fairly sure that your cycle did not run.
It is possible to receive a false skip report however. Generally this can happen during initial phases of schedule setup when you are first putting the system into service.
It can happen if you change or edit your schedule after a command has been sent to your controller, but before it has executed. This is about a 50 minute window of time.
This is a fairly rare occurence that most users will never see, and if it happens it is nothing to be concerned about.
;)
Jim