LawnCheck Smart Irrigation

LawnCheck FAQ and Help => LawnCheck Operation and Usage FAQ => Topic started by: Jim on July 11, 2015, 08:33:36 pm

Title: Sequential Program Linking - Chaining
Post by: Jim on July 11, 2015, 08:33:36 pm

If you are using more than one controller in your LawnCheck Account you can now set up 16 or 24 zone programs while entering only one start time.  The starting program will have a start time and the linked programs will follow sequentially.  This should work for any multiple of controllers but has been only tested with three controllers (for 24 zones).

Here's the help page:  Sequentially linking programs for 16 and 24 zone programs. (http://www.lawncheck.com/lc_link_help.html)